Phoenix Contact ST 10-PE Series Green/Yellow Modular Terminal Block, 1.5 → 16mm², Spring Clamp Termination, Ex
- RS-stocknr.:
- 501-5366
- Fabrikantnummer:
- 3036136
- Fabrikant:
- Phoenix Contact
72 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 5,18
(excl. BTW)
€ 6,27
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 5,18 |
| 10 - 24 | € 5,00 |
| 25 + | € 4,87 |
- RS-stocknr.:
- 501-5366
- Fabrikantnummer:
- 3036136
- Fabrikant:
- Phoenix Contact
Wetgeving en conformiteit
- Land van herkomst:
- PL
Productomschrijving
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Features and benefits:
- Fused for added protection
- The ST 4-FSI/C fuse terminal block accommodates flat-type fuses according to ISO/DIS 8820/DIN 72581-3 or the TCP .../DC32V thermal miniature circuit breaker as the fuse element
- Versions with LED for easily indicating a fuse that has been blown
- Fits on an NS 35/7.5 and NS35/15 DIN rail
- Operating temperatures of -60°C to 85°C
- Spring-loaded fuse terminals adopt the functional operation of the fuse holder and potential distribution
Typical Applications:
• Tested for railway applications
Complete Line:
The ST series is apart of Phoenix Contacts vast and comprehensive portfolio. Complete line is a solution from Phoenix Contact that gives you a full range of products that all go hand-in-hand to make a perfect control cabinet. It covers all bases from connections, switching and measuring all the way to controlling, supplying and automation. Choosing complete line products makes it far more efficient to get a cabinet working.
If you'd like to learn more about Complete Line, please click here.
If you'd like to learn more about Complete Line, please click here.
Note
Cable cross-sectional area quoted refers to cable with rigid conductors
Certificate No.
KEMA 00ATEX2052 U
Group and Category
II 2 G D Ex e II
ST 10-PE Modular terminal block (grounded) - 3036136
The 3036136 from Phoenix Contact is a spring caged, earthed terminal block. Featuring a spring cage connection and 2 connection points, this terminal blocks allows for wires sizes from 24 AWG to 6 AWG. The terminal blocks is green-yellow all over to show easily that it's earthed, has a cross-section of 4mm2 and is designed to be mounted on a DIN rail. The unit is small in size with the width only being 10.2mm so is guaranteed to fit in the tightest of spaces & with its easy connection method, its effortless to set-up.
Features and benefits:
- Easy spring cage connections
- Approved for installation in IEC EX areas
- Cross section - 0.2mm2 to 16mm2
- Accepts cable from 24-6 AWG
- Green-yellow housing made from a durable polyamide
- Mounts onto NS 35/7.5 or NS 35/15 DIN rails
- Small width of only 10.2mm for a space-saving fit
Applications:
This spring cage terminal block can be used in all the below industries, however not limited too:
- Railway industry
- Mechanical engineering
- Plant engineering
- Process industry
Specificaties
Kenmerk | Waarde |
|---|---|
| Colour | Green/Yellow |
| American Wire Gauge | 24 → 6AWG |
| Series | ST 10-PE |
| Termination Method | Spring Clamp |
| Cable CSA | 1.5 → 16mm² |
| Current Rating | 65A |
| Voltage Rating | 8 kV |
| Hazardous Area Certification | Ex |
| Model Number | ST 10-PE |
- RS-stocknr.:
- 501-5366
- Fabrikantnummer:
- 3036136
- Fabrikant:
- Phoenix Contact