Weidmuller, WDU Series , 1 kV Feed Through Terminal Block, Screw Down Termination

  • RS-stocknr. 489-5458
  • Fabrikantnummer WDU 70/95 HG -1024650000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Heavy Duty

Heavy duty feed-through terminals eliminates the need to force large-size conductors into the clamping point. The conductors can simply be placed in the terminal block. Constant force transmission by self adjusting connection system. Beneath the hinged terminal cover, a rising clamp terminal is adjusted via a 6 mm hex socket head.

Features and Benefits

• Safe from finger-touch (VBG 4)
• Extreme distortion resistance
• Terminal blocks can be screwed directly to mounting plates

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Series WDU
Wire Size 6 → 00 AWG
Cable CSA 95mm²
Colour Brown
Current Rating 232A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 1 kV
Minimum Operating Temperature -50°C
Maximum Operating Temperature +120°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
23,28
(excl. BTW)
28,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,28 €
Related Products
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
Fingerproof terminals (to VBG4 requirements)Flammability rating UL 94-V0Please ...
Description:
Fingerproof terminals (to VBG4 requirements)Flammability rating UL 94-V0Please note that none of the jumper bars shown in this range are suitable for use with this productCable sizes from 6 - 35mm2Mounting method DIN rail (top hat rail)/G-rail.
High quality, industry standard terminals designed for mounting ...
Description:
High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 ...