Phoenix Contact ATEX, UK 6 N Series , 800 V Standard Din Rail Terminal, Screw Down Termination

Datasheets
Wetgeving en conformiteit
Niet conform
Productomschrijving

Universal Terminals

Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.

Individual terminals and complementary accessories

Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U

Approvals

E Exei/II; KEMA

Specificaties
Kenmerk Waarde
Series UK 6 N
Wire Size 24 → 8 AWG
Cable CSA 0.2 → 6mm²
Colour Grey
Current Rating 41A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 800 V
Hazardous Area Certification ATEX
1920 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1490 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,505
(excl. BTW)
1,821
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
1,505 €
15,05 €
100 - 240
1,43 €
14,30 €
250 +
1,355 €
13,55 €
*prijsindicatie
Related Products
Select insulation housing a) with Faston type terminals ...
Description:
Select insulation housing a) with Faston type terminals for soldering (version 1) or b) with Faston type terminals for plug-in technology (version 2)Wire fixing: terminal screws M3.5Housing secured by: snap-on attachment on top-hat rails DIN EN 50 022 or screw ...
PLC-OSC series sensor interfaces, consisting of PLC-BSC basic ...
Description:
PLC-OSC series sensor interfaces, consisting of PLC-BSC basic terminal block with screw connection and plug-in miniature solid-state relays and PLC-OSC series solid state relays. Screw connectionYellow LED indicatorOperating temperature: -25 ºC to 60 ºCWide range of accessories also available.
A 6.2 mm PLC interface relay module designed ...
Description:
A 6.2 mm PLC interface relay module designed to be mountable on DIN rail NS 35/7.5. Featuring a basic terminal block with screw connection and a plug-in miniature power relay. • Saves space on the DIN rail• Cost-effective• Use the ...
DIN Rail grounding terminal blocks are a great ...
Description:
DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly ...