Weidmuller, A Series , 800 V Terminal Block, Push In Termination

  • RS-stocknr. 144-9009
  • Fabrikantnummer 2051360000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types

The innovative PUSH IN technology reduces the amountof time you spend on wiring to a minimum. Directinsertion guarantees high conductor pull-out forces andsimple handling for all conductor types

Specificaties
Kenmerk Waarde
Series A
Wire Size 26 → 10 AWG
Cable CSA 4mm²
Colour Green/Yellow
Number of Levels 1
Termination Method Push In
Voltage Rating 800 V
Minimum Operating Temperature -60°C
Maximum Operating Temperature +130°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,69
(excl. BTW)
3,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
2,69 €
Related Products
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
An additional selection of 2.5 and 4mm² terminals ...
Description:
An additional selection of 2.5 and 4mm² terminals in useful colours including the newphase colours black, brown and grey, as well as white, orange, yellow and red. Identify signals or voltages easilyTerminal colours match incoming cables, reducing wiring errorThree phase ...
Our tailored AAP potential distribution terminal blocks are ...
Description:
Our tailored AAP potential distribution terminal blocks are ideal for surge current protection and central control voltage distribution. Meanwhile, our new maxGUARD range enables potential distribution with integrated electronic load monitoring in the smallest of installation spaces.
Feed-through terminal block, nom. voltage: 800 V, nominal ...
Description:
Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 2, number of positions: 1, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.3 mm, ...