PSENcode ATEX Magnetic Safety Non-Contact Switch, Plastic, 24 V dc

  • RS-stocknr. 918-6689
  • Fabrikantnummer 540005
  • Fabrikant Pilz
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

PSENcode Large Non-Contact Safety Switch, Hazardous Area

The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
The PSEN cs2.13p safety switch (stock no. 619-2795) is fully coded and switches with an actuator from the PSEN cs2.1 series. These actuators must be taught. It can be taught up to a maximum of 8 times but only 1 actuator at a time is taught.

Features and Benefits

Series connection, more than 10 safety switches in sequence to Cat 4 of EN954-1
Switch reacts to a single actuator but can be taught a new actuator up to 8 times
5 directions of actuation
M12 connection, 8-pin
For use in EX area Category 3, Zones 2 and 22 in accordance with EN50021
IP67 protection

Note

When the safety gate is closed the switch provides 2 N/C semiconductor outputs.

Caution

EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENcode), actuator (PSENcode) and a safety monitoring module (PNOZ X or PNOZmulti) is used.

Standards

EN954-1 (Cat 4), EN60204-1, EN60947-5-3.

Approvals

CE, cULus Listed, ATEX, TÜV, FCC, IC, ECOLAB.

Supplied with

Actuator

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Connection Type M12
Range PSENcode
Switching Distance 15 mm
IP Rating IP67
Actuator Included Yes
Hazardous Area Certification ATEX
Sensor Principle Magnetic
Safety Category 4
Length 75mm
Housing Colour Yellow
Dimensions 75 x 40 x 40 mm
Actuator Type Coded
Width 40mm
Depth 40mm
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
206,36
(excl. BTW)
249,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
206,36 €
Related Products
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
The Erwin sick inductive proximity sensor has a ...
Description:
The Erwin sick inductive proximity sensor has a Semiconductor (OSSD) type of out put works with a supply voltage of 24V DC and the housing material of this sensor is made of nickel plated brass. Sensing range (Sn) up to ...
The Erwin sick inductive proximity sensor has a ...
Description:
The Erwin sick inductive proximity sensor has a Semiconductor (OSSD) type of out put works with a supply voltage of 24V DC and the housing material of this sensor is made of nickel plated brass. Sensing range (Sn) up to ...
The Schneider XCS-DMR coded magnetic safety switches are ...
Description:
The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. ...