Schmersal Non-Contact Safety Switch, 20.4 to 26.4V DC, 91mm Length - RSS 16 Series - RSS16-D-SK
Use this non-contact safety switch from Schmersal to automate the locking of your guard doors. It's used to prevent access to hazardous equipment during operation, preventing injury to personnel and damage to machinery. The switch is tamperproof as it's coded using RFID (radio frequency identification) technology, meaning you can only use it with an actuator that has the same frequency. You can install this switch in areas where space is limited thanks to its compact dimensions of 91 (length) x 52 (width) x 30mm (depth).
Features & Benefits
• Wide operating temperature range of -25°C to +70°C for use in hot and cold environments • Screw terminal connections for simple and secure installation • IP65 (ingress protection) and IP67 ratings for protection against dust, low-pressure water jets and submersion in 1m of water for up to 30 minutes
Applications
• Industrial automation • Security systems • Factories and workshops
What's this safety switch made of?
This safety switch is made of a durable glass fibre-reinforced thermoplastic material that's resistant to impact and heat. This makes it a good choice for use in harsh industrial environments.
Kenmerk
Waarde
Supply Voltage
20.4 → 26.4V dc
Housing Material
Glass Fibre Reinforced Thermoplastic
Connection Type
M16
Actuator Type
Coded
Safety Category
3
Sensor Principle
RFID
Actuator Included
No
Series
RSS 16
Switching Distance
15 mm, 12 (On) mm, 30 (Off) mm
IP Rating
IP65, IP67
Supply Current
2100mA
Length
91mm
Standards Met
CE Listed, cULus Listed, EN 62061, EN ISO 13849-1, IEC 60947-5-3, IEC 61508, TUV
Schmersal Non-Contact Safety Switch, 20.4 to 26.4V DC, 91mm Length - RSS 16 Series - RSS16-D-SK
Use this non-contact safety switch from Schmersal to automate the locking of your guard doors. It's used to prevent access to hazardous equipment during operation, preventing injury to personnel and damage to machinery. The switch is tamperproof as it's coded using RFID (radio frequency identification) technology, meaning you can only use it with an actuator that has the same frequency. You can install this switch in areas where space is limited thanks to its compact dimensions of 91 (length) x 52 (width) x 30mm (depth).
Features & Benefits
• Wide operating temperature range of -25°C to +70°C for use in hot and cold environments • Screw terminal connections for simple and secure installation • IP65 (ingress protection) and IP67 ratings for protection against dust, low-pressure water jets and submersion in 1m of water for up to 30 minutes
Applications
• Industrial automation • Security systems • Factories and workshops
What's this safety switch made of?
This safety switch is made of a durable glass fibre-reinforced thermoplastic material that's resistant to impact and heat. This makes it a good choice for use in harsh industrial environments.
Kenmerk
Waarde
Supply Voltage
20.4 → 26.4V dc
Housing Material
Glass Fibre Reinforced Thermoplastic
Connection Type
M16
Actuator Type
Coded
Safety Category
3
Sensor Principle
RFID
Actuator Included
No
Series
RSS 16
Switching Distance
15 mm, 12 (On) mm, 30 (Off) mm
IP Rating
IP65, IP67
Supply Current
2100mA
Length
91mm
Standards Met
CE Listed, cULus Listed, EN 62061, EN ISO 13849-1, IEC 60947-5-3, IEC 61508, TUV