Sensaguard 440N RFID Safety Switch, Stainless Steel, 24 V dc

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

SensaGuard 440N Cylindrical Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Note

Stainless steel version suitable for use in harsh environments.

Standards

IEC60947-5-3, IEC 61508, EN954

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Stainless Steel
Range Sensaguard
Series 440N
IP Rating IP69K
Actuator Included Yes
Dimensions 18 (Dia.) x 67.06 mm
Housing Colour Red
Safety Category 4
Sensor Principle RFID
Actuator Type Coded
Length 67.06mm
Width 18 (Dia.)mm
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
139,00
(excl. BTW)
168,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
139,00 €
Related Products
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
The Ferrogard GD2 is a magnetically actuated non-contact ...
Description:
The Ferrogard GD2 is a magnetically actuated non-contact safety switch which offers reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the ...
Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 ...
Description:
Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 N/C solid state relay outputs and 1 PNP auxiliary outputSwitching current: 200 mA @ 24VdcSupply Voltage: 24VdcIP 69K protection ratingCategory 1 device per EN 954-1, dual channel contacts suitable for Cat 3 ...