RS PRO Test Lead Kit, Fused, CAT III 600 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Multimeter Lead Set in Pouch

RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set

2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).
Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:
Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions
Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

Standards

EC 1010 Cat III 600V; GS38

Warning

  • Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.
Specificaties
Kenmerk Waarde
Lead Type Test Lead Kit
Connector Type Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
Fused Yes
Lead Length 1.2m
Safety Category Voltage 600V
Safety Category CAT III 600 V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Safety Category Level CAT III
45 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
105 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
54,32
(excl. BTW)
65,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
54,32 €
Related Products
A miniature test lead set comprising leads, probes, ...
Description:
A miniature test lead set comprising leads, probes, clips and adaptors to give quick and easy access to circuitry. Supplied in a convenient zipped PVC bag. Maximum working voltage: 30V a.c./60V d.c.
The Keysight U1161A Multimeter test lead set provides ...
Description:
The Keysight U1161A Multimeter test lead set provides much-needed precision with electronic testing. With a full set of Multimeter test lead accessories including leads, probes and plugs, this kit ensures the reading will be guarantee near perfection. All models are ...
High-quality test lead kit designed for engineers. Red ...
Description:
High-quality test lead kit designed for engineers. Red & Black Double Insulated Silicone Test LeadsRed & Black Long Reach ProbesRed & Black Fully Insulated Crocodile ClipRed & Black Ultra Thin Back Probes incorporating a cable piercing adapterRed & Black Extended ...
Comprehensive set for use in low energy, electronic ...
Description:
Comprehensive set for use in low energy, electronic test applications that require fine probing. Compatible with Fluke and most other multimeters,Supplied in a handy vinyl soft wallet. 1.0m silicone lead terminated at one end with 4mm shrouded right angled plug ...