Schneider Electric Plug-in Base Acti 9 for use with ARA, IC60, iDPN Vigi, iLD, ISW, ISW-NA, RCA, Reflex iC60

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Act9 Circuit Protection Accessories

A complete range of mounting and wiring accessories as padlock system, screw shields, plug-in base and clip on marker to facilitate all operations including on-site interventions avoiding downtime for greater continuity of service

Specificaties
Kenmerk Waarde
Accessory Type Plug-in Base
Range Acti 9
For Use With ARA, IC60, IDPN Vigi, ILD, ISW, ISW-NA, RCA, Reflex iC60
Series iC60
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
31,42
(excl. BTW)
38,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
31,42 €
10 - 14
30,45 €
15 +
29,40 €
Related Products
Enclosure rated at IP55Stop button can be fitted ...
Description:
Enclosure rated at IP55Stop button can be fitted to the front of the enclosureUse ’connector’ to connect manual motor starters to the contactorsAdapter plate has 3 pole connection for mounting of a GV2 and an LC1 D09 to D25 contactor. ...
Accommodates up to 8 x 1610 series circuit ...
Description:
Accommodates up to 8 x 1610 series circuit breakersVoltage rating of 32VdcPolarised detachable lid with thumbscrewGasket seal between lid and baseRequires 96.5 x 27.0mm panel cut-out6.3 x 0.8mm spade terminalsIP54 rating.
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
Common components for the Redline product range, comprising ...
Description:
Common components for the Redline product range, comprising of the terminal staking device and the remote display panel. The STAK25 allows for conversion of type 2 surge devices to feed through wiring as per the requirements of BS7671 amendment 1 ...