Siemens Enclosure Sirius Classic for use with 3RV2 Series

  • RS-stocknr. 755-2860
  • Fabrikantnummer 3RV1923-1DA01
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AU
Productomschrijving

SIRIUS 3RV1 Enclosures

A Siemens range of enclosures, equipped with N and PE/ground terminals, for installing circuit breakers as a single unit. There are two knock-out cable entries for cable glands at the top and two at the bottom of the enclosure, with scored cable entries at the rear. A knock-out on the top of the enclosure is provided for indicator lights.

Equipped with N and PE/ground terminals
Two knock-outs at top and bottom, with scored cable entries at the rear
Moulded plastic or aluminium, flush or wall mounted

Siemens SIRIUS Cage Clamp Technology

As an alternative to screw connections a large number of Siemens low voltage components are also available with cage clamp connections.,Solid, stranded and finely stranded conductors, with or without end sleeves, can be connected, where two conductors can be clamped independent of one another at each terminal.,Inserting a flat bladed screwdriver opens the terminal; the conductor is then introduced and securely clamped following the removal of the screwdriver. The chromium-nickel spring steel of the cage clamp terminal guarantees corrosion resistant contact of the conductors.

Advantages

Time saving: the connection can be made quickly without having to press on end sleeves
Reliability: the terminal connection is resistant to shock and vibration
Vertical Mounting
Reduced maintenance: the cage clamp system means that the checking of screw connections following transportation is unnecessary

Specificaties
Kenmerk Waarde
Accessory Type Enclosure
Range Sirius Classic
For Use With 3RV2 Series
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
59,46
(excl. BTW)
71,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
59,46 €
10 - 14
57,59 €
15 +
55,61 €
Related Products
Enclosure rated at IP55Stop button can be fitted ...
Description:
Enclosure rated at IP55Stop button can be fitted to the front of the enclosureUse ’connector’ to connect manual motor starters to the contactorsAdapter plate has 3 pole connection for mounting of a GV2 and an LC1 D09 to D25 contactor. ...
Safe detection of mechanical and sensitive protective equipment ...
Description:
Safe detection of mechanical and sensitive protective equipment on an ASi network. Accepts two category 2 safety devices according to EN 954-1 or one category 4 device to EN954-1. If Category 4 is required, a two-channel input is available on ...
Three-phase busbar systems provide an easy, time-saving and ...
Description:
Three-phase busbar systems provide an easy, time-saving and clearly arranged means of feeding 3RV2 motor starter protectors with screw terminals. The system can be used with various types of motor starter protectors up to 32 A. The 3RV19 15 three-phase ...
The connection busbars ensure correct installation of all ...
Description:
The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etc.The busbars can be cut using a saw.