Schneider Electric Connector for use with LC1 Series

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Mechanical and Electrical Interlocks and Interlock Kits

Kits are for mechanically interlocking two identical contactors. Prevents the second contactor from pulling-in if the first is energised.

Specificaties
Kenmerk Waarde
Accessory Type Connector
For Use With LC1 Series
Series LAD9
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
22,55
(excl. BTW)
27,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
22,55 €
10 - 14
21,85 €
15 +
21,11 €
Related Products
These surge protection devices are recommended for locations ...
Description:
These surge protection devices are recommended for locations having a high exposure to lightning, for example, light entrances to buildings protected by lightning rods or powered by aerial lines. These products are installed at the entrance of the installation (such ...
For Lightning Protection Levels III and IVSeamless pluggability ...
Description:
For Lightning Protection Levels III and IVSeamless pluggability of even N/PE spark gapSecure hold of connectors in the event of high lightning current loads and strong vibrationThermal disconnect device for each individual connectorOptical, mechanical status indication for the individual arrestersMechanical ...
For Lightning Protection Levels III and IVSeamless pluggability ...
Description:
For Lightning Protection Levels III and IVSeamless pluggability of even N/PE spark gapSecure hold of connectors in the event of high lightning current loads and strong vibrationThermal disconnect device for each individual connectorOptical, mechanical status indication for the individual arrestersMechanical ...
Compact design with precise nominal current levelsModular expansion ...
Description:
Compact design with precise nominal current levelsModular expansion possible thanks to the uniform, plug-in housing conceptActive current limitation, even when switching capacitive loadsN/O contact for remote signaling of the operating state.