ABB 5 A Motor Load Monitor

  • RS-stocknr. 235-3255
  • Fabrikantnummer LPM.400L000
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Load Power Monitor

The load power monitor achieves effective protection for three-phase motors in critical applications, guarding against nuisance trips because of voltage fluctuations.,Reliable detection of overload or underload operating conditions is achieved by measurement of this true power.

Independent settings for power high and power low
Independent output contacts for each trip setting
Independent trip delay adjustment for each output
Built-in current transformer for load currents up to 5A
Separate adjustable start-up delay
Auto/manual/local/remote reset
Indicators for supply, power high and power low

//media.rs-online.com/t_line/L235325-01.gif
Specificaties
Kenmerk Waarde
Motor Protection Component Load Monitor
Sensing Type Current Transformer
Current Rating 5 A
Overall Length 84mm
Overall Width 66mm
Overall Depth 116mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
585,55
(excl. BTW)
708,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
585,55 €
Related Products
The Altivar Process ATV930 variable speed drive is ...
Description:
The Altivar Process ATV930 variable speed drive is for demanding applications that have a power rating ranging from 0.75 kW to 800 kW. It is a Services Oriented Drive that has been designed and created to reduce OPEX in process ...
The 3RV10 current limiting motor starter protector is ...
Description:
The 3RV10 current limiting motor starter protector is commonly known as a motor protection switch, as they are used for switching and protecting induction motors. Seimens 3RV Manual Motor Starters are optimized for load feeders. The motor circuit breakers are ...
The EL-FI M20 supervises induction motor driven equipment ...
Description:
The EL-FI M20 supervises induction motor driven equipment and provides alarms when abnormal loads are detected. The EL-FI M20's ability to provide reliable monitoring and protection ensures production equipment is optimised and expensive breakdowns and interruptions are minimised. Due to ...
The APM10 is a monitor- and protection unit ...
Description:
The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers. Transmitter for kW, 3 phase symmetrical loadFor connecting to a 3 phase net of ...