- RS-stocknr.:
- 214-8086
- Fabrikantnummer:
- TB67S128FTG(O,EL)
- Fabrikant:
- Toshiba
756 op voorraad - levertijd is 1 werkdag(en).
Prijs Per stuk (in een verpakking 2)
€ 7,28
(excl. BTW)
€ 8,81
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
2 - 48 | € 7,28 | € 14,56 |
50 - 98 | € 6,475 | € 12,95 |
100 - 498 | € 5,83 | € 11,66 |
500 - 1998 | € 4,86 | € 9,72 |
2000 + | € 4,475 | € 8,95 |
*prijsindicatie |
- RS-stocknr.:
- 214-8086
- Fabrikantnummer:
- TB67S128FTG(O,EL)
- Fabrikant:
- Toshiba
Datasheets
Wetgeving en conformiteit
Productomschrijving
The Toshiba serial controlled bipolar stepping motor driver is two-phase IC with a built-in clock-in decoder. This monolithic IC is fabricated with the BiCD process, and has output rating of 50 V/5.0 A.
PWM controlled constant-current drive
Low on-resistance (High + Low side = 0.25 Ω (typ.))
MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation.
High efficiency motor current control mechanism (ADMD: Advanced Dynamic Mixed Decay)
Built-in Anti-stall architecture (AGC: Active Gain Control)
Built-in Sense resistor less current control architecture (ACDS: Advanced Current Detection System)
High voltage and current
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), Power-on-reset (POR), motor load open(OPD)).
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistance and capacitor
Small package with thermal pad
Low on-resistance (High + Low side = 0.25 Ω (typ.))
MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation.
High efficiency motor current control mechanism (ADMD: Advanced Dynamic Mixed Decay)
Built-in Anti-stall architecture (AGC: Active Gain Control)
Built-in Sense resistor less current control architecture (ACDS: Advanced Current Detection System)
High voltage and current
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), Power-on-reset (POR), motor load open(OPD)).
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistance and capacitor
Small package with thermal pad
Specificaties
Kenmerk | Waarde |
---|---|
Motor Type | Stepper |
Output Configuration | Bipolar |
Maximum Output Current | 5A |
Maximum Supply Voltage | 44 V |
Mounting Type | Surface Mount |
Package Type | VQFN |
Pin Count | 64 |