- RS-stocknr.:
- 214-8085
- Fabrikantnummer:
- TB67S128FTG(O,EL)
- Fabrikant:
- Toshiba
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/12/2024, met een levertijd van 2 à 3 werkdagen.
Prijs Per stuk (op een rol 4000)
€ 4,153
(excl. BTW)
€ 5,025
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
4000 + | € 4,153 | € 16.612,00 |
*prijsindicatie |
- RS-stocknr.:
- 214-8085
- Fabrikantnummer:
- TB67S128FTG(O,EL)
- Fabrikant:
- Toshiba
Datasheets
Wetgeving en conformiteit
Productomschrijving
The Toshiba serial controlled bipolar stepping motor driver is two-phase IC with a built-in clock-in decoder. This monolithic IC is fabricated with the BiCD process, and has output rating of 50 V/5.0 A.
PWM controlled constant-current drive
Low on-resistance (High + Low side = 0.25 Ω (typ.))
MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation.
High efficiency motor current control mechanism (ADMD: Advanced Dynamic Mixed Decay)
Built-in Anti-stall architecture (AGC: Active Gain Control)
Built-in Sense resistor less current control architecture (ACDS: Advanced Current Detection System)
High voltage and current
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), Power-on-reset (POR), motor load open(OPD)).
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistance and capacitor
Small package with thermal pad
Low on-resistance (High + Low side = 0.25 Ω (typ.))
MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation.
High efficiency motor current control mechanism (ADMD: Advanced Dynamic Mixed Decay)
Built-in Anti-stall architecture (AGC: Active Gain Control)
Built-in Sense resistor less current control architecture (ACDS: Advanced Current Detection System)
High voltage and current
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), Power-on-reset (POR), motor load open(OPD)).
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistance and capacitor
Small package with thermal pad
Specificaties
Kenmerk | Waarde |
---|---|
Motor Type | Stepper |
Output Configuration | Bipolar |
Maximum Output Current | 5A |
Maximum Supply Voltage | 44 V |
Mounting Type | Surface Mount |
Package Type | VQFN |
Pin Count | 64 |