- RS-stocknr.:
- 214-8082
- Fabrikantnummer:
- TB67H452FTG(Z,EL)
- Fabrikant:
- Toshiba
3985 op voorraad - levertijd is 1 werkdag(en).
Prijs Per stuk (in een verpakking 5)
€ 3,572
(excl. BTW)
€ 4,322
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
5 - 45 | € 3,572 | € 17,86 |
50 - 95 | € 3,176 | € 15,88 |
100 - 245 | € 2,858 | € 14,29 |
250 - 995 | € 2,596 | € 12,98 |
1000 + | € 2,202 | € 11,01 |
*prijsindicatie |
- RS-stocknr.:
- 214-8082
- Fabrikantnummer:
- TB67H452FTG(Z,EL)
- Fabrikant:
- Toshiba
Datasheets
Wetgeving en conformiteit
Productomschrijving
The Toshiba PWM chopper type 4 ch H-bridge motor driver can drive two steppers, two DC brushed motors and one stepping motor, etc. by combining 4 ch H-bridges and it can also drive dual DC brushed motors or stepping motors for large-current drive by setting large mode. The VM power supply voltage can be used 6.3 V or more hence it is optimal for battery powered applications with 7.2 V power supply.
Monolithic IC structured by CD process
Low ON-resistance: Ron = 0.6 Ω
ON-resistance (Ron) = 0.3 Ω.
Over-current detection (ISD), thermal shutdown (TSD), and VM power-on reset circuits
Package: QFN48
Maximum output withstand voltage: 40 V (max)
Output current: 3.5 A (peak) in DC Motor (S) mode
Chopping frequency can be set by external capacitor and resistor
High-speed chopping is possible at 100 kHz or more
Low ON-resistance: Ron = 0.6 Ω
ON-resistance (Ron) = 0.3 Ω.
Over-current detection (ISD), thermal shutdown (TSD), and VM power-on reset circuits
Package: QFN48
Maximum output withstand voltage: 40 V (max)
Output current: 3.5 A (peak) in DC Motor (S) mode
Chopping frequency can be set by external capacitor and resistor
High-speed chopping is possible at 100 kHz or more
Specificaties
Kenmerk | Waarde |
---|---|
Motor Type | DC |
Output Configuration | PWM |
Configuration | H Bridge |
Maximum Output Current | 3.5A |
Maximum Supply Voltage | 40 V |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 48 |