STMicroelectronics X-NUCLEO-IHM14A1 Stepper Motor Driver Expansion Board Stepper Expansion Board for X-NUCLEO-IHM14A1

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors. It represents an affordable, easy-to-use solution for driving stepper motors in your STM32 Nucleo project, implementing motor driving applications such as 2D/3D printers, robotics and security cameras. The STSPIN820 implements a PWM current control with constant OFF time adjustable via an external resistor and a microstepping resolution up to the 256th step.

Operating voltage: 7 to 45 V
Output current up to 1.5 Arms
Fine tuning microstepping up to the 256th step
Current control with adjustable OFF time
Full protection set:
Overcurrent protection
Short-circuit protection
Under voltage lock out
Thermal shutdown
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
RoHS compliant

Specificaties
Kenmerk Waarde
Kit Name Stepper Motor Driver Expansion Board
Kit Classification Expansion Board
For Use With Arduino UNO R3, STM32 Nucleo
Motor Type Stepper
Featured Device X-NUCLEO-IHM14A1
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,53
(excl. BTW)
17,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
14,53 €
Related Products
Description:
The Stepper 3 click is an add-on board that driver unipolar stepper motors with precise controls. A high-voltage, high-current Darlington Transistor Array (Texas Instruments ULN2003A) operates the motor windings. Individual motor phases can be accessed separatelyExternal motor power supply up ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control ...
Description:
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board. • 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers • ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor ...