ON Semiconductor LB1939TGEVB EVABOARD Stepper Evaluation Board for LB1939T-MPB-E, LB1939T-TLM-E

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The LB1939T is a constant voltage driver for single stepping motor. It is optimal for motor drive in portable system products. (Battery drive available )

Low voltage drive
Dual power supply operation Vs=1.6V to 7.5V VDD=1.9V to 6.5V
Single power supply operation Vs=VDD=1.9V to 7.5V
Low saturation voltage Vosat=0.3V at Io=200mA
Supports constant voltage and constant current drive
Built-in reference voltage circuit
Small and thin package TSSOP20
Current consumption 0 uA by standby mode

Specificaties
Kenmerk Waarde
Kit Name EVABOARD
Kit Classification Evaluation Board
For Use With Single Stepping Motor Drive
Motor Type Stepper
Featured Device LB1939T-MPB-E, LB1939T-TLM-E
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
92,28
(excl. BTW)
111,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,28 €
Related Products
The RTC click add-on board is perfect for ...
Description:
The RTC click add-on board is perfect for adding a real-time clock, calendar & alarm to your design.Features & Benefits of the RTC2 click•mikroBUS™ pinout standard•DS51307 serial RTC•Energy saving•Programmable square-wave output•Includes leap-year•3 V/230 mA lithium battery for backup ...
The Thumbstick click add-on board is perfect for ...
Description:
The Thumbstick click add-on board is perfect for designs where an analog thumb joystick is required, such as gaming consoles.Features & Benefits of the Thumbstick click•mikroBUS™ pinout standard•MCP3204 12-bit A/D converter•Dual axis joystick unit with spring return and push-button•2 ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 ...