ON Semiconductor LV8731VGEVB H-Bridge Driver IC Evaluation Board Stepper Evaluation Board for LV8731V-TLM-H

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The LV8731V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports 1/16-step resolution, and two channels of a brushed motor driver, which supports forward, reverse, brake, and standby of a motor.

Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated
BiCDMOS process IC
Micro-step mode can be set to Full-step, Half-step, Quarter-step, or 1/16-step
Excitation step proceeds only by step signal input
Motor current selectable in four steps
Output short-circuit protection circuit (selectable from latch-type or auto-reset-type) incorporated
Unusual condition warning output pins
Built-in thermal shutdown circuit
No control power supply required
Pin compatibility series

Specificaties
Kenmerk Waarde
Kit Name H-Bridge Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With Brushed Motor Drive, Stepping Motor Drive, 2-Channel H Bridge Drive
Motor Type Stepper
Featured Device LV8731V-TLM-H
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
38,21
(excl. BTW)
46,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
38,21 €
Related Products
The X-NUCLEO-CCA01M1 expansion board is based on the ...
Description:
The X-NUCLEO-CCA01M1 expansion board is based on the STA350BW Sound Terminal® 2.1-channel digital audio amplifier chip. The STA350BW device integrates digital audio processing, digital amplifier control and an FFX™ digital power output stage providing high-quality, high-efficiency and all-digital amplification. ...
The NCS2632 is a pop-free stereo line driver. ...
Description:
The NCS2632 is a pop-free stereo line driver. It uses ON Semiconductor's patented NOCAP technology which allows the elimination of the external DC-blocking capacitors by providing ground-referenced outputs through the generation of an internal negative supply rail. The device can ...
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any ...
Description:
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any frequency I2C programmable crystal oscillators/Voltage control crystal oscillators; Si514; Si570; Si571; Si598 and Si599. Kit contains the hardware and software and EVB driver (USBXpress®)Supported frequency: 100 kHz to 1417MHzAdjusting VDD ...
The Si5347-EVB evaluation board is designed to evaluate ...
Description:
The Si5347-EVB evaluation board is designed to evaluate the Si5347 Jitter Attenuating Clock Multiplier allowing for a smooth transition from Clockbuilder Pro device configuration to performance evaluation. On-board SMA connectors allow for measurement via independent input and output clocks. The ...