Carlo Gavazzi Driver Board for Use with Door Control Motor, 0.55 kW, Single-Phase, 230 V
- RS-stocknr.:
- 263-2945
- Fabrikantnummer:
- RVDS120055F
- Fabrikant:
- Carlo Gavazzi
2 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 272,60
(excl. BTW)
€ 329,85
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 272,60 |
- RS-stocknr.:
- 263-2945
- Fabrikantnummer:
- RVDS120055F
- Fabrikant:
- Carlo Gavazzi
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- MT
Productomschrijving
The Carlo Gavazzi variable frequency drive for doors and entrances is a single phase input variable frequency drive for industrial doors and entrances powered from induction motors. This variable frequency drive uses sensor less vector control for higher torque at low speeds. Its specifications are stated at 40°C at a switching frequency of 6kHz.
Flexible configuration via digital inputs- various configuration options are possible via the 5 digital inputs
Easy to use: limited configuration parameters required for shorter setup times
Time savings during installation: Push-in connectors for faster a
Easy to use: limited configuration parameters required for shorter setup times
Time savings during installation: Push-in connectors for faster a
Specificaties
Kenmerk | Waarde |
|---|---|
| Accessory Type | Driver |
| For Use With | Door Control Motor |
| Voltage Range | 230 V |
| Current Rating | 2.5 A |
| Electrical Phase | Single |
| Power Rating | 0.55 kW |