Melexis Surface Mount Hall Effect Sensor, TSOT, 23-Pin
- RS-stocknr.:
- 194-2970P
- Fabrikantnummer:
- US5881ESE-AAA-000-RE
- Fabrikant:
- Melexis
790 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (geleverd op een wiel) Quantities below 150 on continuous strip
€ 0,404
(excl. BTW)
€ 0,489
(incl. BTW)
| Aantal stuks | Per stuk |
| 50 - 90 | € 0,404 |
| 100 - 240 | € 0,347 |
| 250 - 990 | € 0,338 |
| 1000 + | € 0,329 |
- RS-stocknr.:
- 194-2970P
- Fabrikantnummer:
- US5881ESE-AAA-000-RE
- Fabrikant:
- Melexis
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
The US5881 is a low sensitive unipolar Hall-effect switch designed in mixed signal CMOS technology.
The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is suitable for use in automotive and solid state switch applications.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is suitable for use in automotive and solid state switch applications.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
Wide operating voltage range from 3.5 V to 24 V
Low sensitivity
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package North pole active
UA package South pole active
Low sensitivity
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package North pole active
UA package South pole active
Specificaties
Kenmerk | Waarde |
|---|---|
| Sensor Type | Hall Effect Sensors |
| Mounting Type | Surface Mount |
| Magnetic Type | Unipolar |
| Maximum Operating Supply Voltage | 24 V |
| Minimum Operating Supply Voltage | 3.5 V |
| Package Type | TSOT |
| Pin Count | 23 |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Temperature | -40 °C |