- RS-stocknr.:
- 194-2954P
- Fabrikantnummer:
- MLX92213ELD-AAA-000-RE
- Fabrikant:
- Melexis
550 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (geleverd op een wiel) Quantities below 150 on continuous strip
€ 0,286
(excl. BTW)
€ 0,346
(incl. BTW)
Aantal stuks | Per stuk |
50 - 475 | € 0,286 |
500 - 975 | € 0,278 |
1000 - 2475 | € 0,272 |
2500 + | € 0,264 |
- RS-stocknr.:
- 194-2954P
- Fabrikantnummer:
- MLX92213ELD-AAA-000-RE
- Fabrikant:
- Melexis
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- MY
Productomschrijving
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
Specificaties
Kenmerk | Waarde |
---|---|
Sensor Type | Hall Effect Sensors |
Mounting Type | Surface Mount |
Magnetic Type | Latch |
Maximum Operating Supply Voltage | 3.6 V |
Minimum Operating Supply Voltage | 1.6 V |
Package Type | UTQFN |
Pin Count | 6 |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |