Siemens Thermistor motor protection relay Monitoring Relay With SPDT Contacts, 24 V ac/dc

  • RS-stocknr. 417-9879
  • Fabrikantnummer 3RN1000-1AB00
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

3RN10-00

Standard 22.5mm module width

Compact, low cost unit, with LED 'tripped' indicator and 1 change over relay contact. Reset is automatic when sensor has cooled down. Control and signalling voltages should have the same potential.

Note

!!! Phase-out product !!! This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the preferred successor proposed by the manufacturer: 175-2269 (3RN2000-1AA30)

Siemens 3RN1 Thermistor Relays

3RN1 thermistor relays are a range of thermal protection devices, which when used in conjunction with external PTC thermistors, offer temperature monitoring of electrical drives, transformers and other critical components such as bearings. The 3RN1 range operates on the principle of closed-circuit current and are therefore self monitoring in the event of sensor wire breakage.

Specificaties
Kenmerk Waarde
Monitoring Application Thermistor motor protection relay
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Temperature Sensitivity Overtemperature, Undertemperature
Temperature Sensing Range +60 → +180°C
Minimum Operating Temperature -25°C
Maximum Temperature Sensed +180°C
Operating Temperature Range -25 → +60 °C
Maximum Operating Temperature +60°C
Height 83mm
Dimensions 91 x 22.5 x 83 mm
Minimum Temperature Sensed +60°C
Width 22.5mm
Length 91mm
18 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 62,48 €
56,80
(excl. BTW)
68,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
56,80 €
Related Products
This product is used in conjunction with an ...
Description:
This product is used in conjunction with an external Core Balance Current Transformer (CBCT) and will detect residual sinusoidal alternating and pulsating direct currents. An adjustable trip level and time delay allows the product to be set according to the ...
Low noise a.c. compact modular contactors and accessories ...
Description:
Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular ...
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...
3RN1 thermistor motor protection devices are thermal protection ...
Description:
3RN1 thermistor motor protection devices are thermal protection devices that are suitable, in combination with type A PTC resistors (cold conductors), for monitoring the temperature of electrical drives, transformer windings, oils, bearings, air etc. Work according to the closed circuit ...