Lamp, Yellow LED, Flashing Light Effect, 24 V dc

  • RS-stocknr. 181-1661
  • Fabrikantnummer 8WD5320-0CD
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Siemans SIRIUS 8WD5 Continuous Light Element

The Siemans SIRIUS 8WD5 continuous light element without light source is an excellent solution for visual signalling in harsh ambient conditions as well as outdoor installations. Suitable for use as an optical signal of the operating status in production plants and industrial environments.

This integrated signal lamp is extremely resistant to both shock and vibration with the specially designed shape to provide optimum light emission to either the side or upwards. In addition to a continuous light, blinking lights, rotating beacon lights and flashing lights are also available in various colours and voltages.

Feet, pipes, adapters, incandescent lamps, LEDs and pipe adapters are available as accessories.

Features and Benefits

  • Compact and efficient design

  • IP65 rated for versatile in and outdoor use

  • Low 5W consumed active power rating

  • Flush mount bayonet installation

Applications

  • Industrial signalling columns

  • Visual warning devices

Specificaties
Kenmerk Waarde
Component Type Continuous Light Element
Current Type DC
Light Effect Flashing
Lens Colour Yellow
Lamp Included Yes
Bulb Type LED
Supply Voltage 24 V dc
Height 66mm
Base Diameter 70mm
Minimum Temperature -20°C
Housing Colour Yellow
Maximum Temperature +60°C
IP Rating IP65
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 182,00 €
169,20
(excl. BTW)
204,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
169,20 €
Related Products
The LED100 economy series is suitable for light ...
Description:
The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The ...
A selection of incandescent, LED and neon bulbs ...
Description:
A selection of incandescent, LED and neon bulbs for use with XVB, XVD and XVP modular signal towers. LEDs have a BA 15d base fittingIncandescent and neon have a BA9S base fitting12V, 24V 110V or 120VAmber (orange), clear, blue, green, ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these single chip LED indicators have a reflector to maintain optimum brightness at low energy consumption with a long life service life. Fitted with an easy-to-install screw mounting, these RS Brand LED ...
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...