Mitutoyo 293-140-30 Micrometer Special, Range 0 → 25 mm

  • RS-stocknr. 794-3522
  • Fabrikantnummer 293-140-30
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Mitutoyo Series 293 QuantuMike Micrometer

Coolant proof micrometer range rated to IP65 that gives a quick responce due to it's spindle design. It's rapid action is backed up by a highly stable frame and heat shield to provide professional results and high accuracy.

The ratchet spindle gives 2 mm of feed for every revolution
0 to 25 mm or 25 to 50 mm options
Available with and without SPC data output
± 1μm accuracy
0.001 resolution
LCD Display
Rated to IP65
Function lock
Alarm
Takes 1 SR44 battery (supplied)

Micrometers - Digital

Digital Electronic LCD Display micrometers, for workshop or maintenance use.

Specificaties
Kenmerk Waarde
Accuracy ±1 μm
Resolution 0.001 mm
Imperial or Metric Metric
Micrometer Type Special
SPC Data Output Yes
Data Processing Yes
Battery Operated Yes
Maximum Measurement 25mm
Minimum Measurement 0mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
350,00
(excl. BTW)
423,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
350,00 €
Kalibratie-opties
Related Products
These three digital depth gauges give measurements in ...
Description:
These three digital depth gauges give measurements in imperial or metric with resolution to 0.0005in. or 0.01mm. It has functions for ± deviation from nominal, instant metric/imperial conversions and an output port for transmission to Mitutoyo SPC data processors. The ...
GCL25 Combi Laser combines a cross line laser ...
Description:
GCL25 Combi Laser combines a cross line laser and 5 point laser in one mobile unit. Extremely versatile: cross line laser and five-point laser in one covers all interior alignment applicationsHorizontal and vertical levelling, square, layout and plumb transferCompact and ...
RS Pro 2 piece general purpose measuring set, ...
Description:
RS Pro 2 piece general purpose measuring set, precision caliper and micro-meter for accuracy in a wide range of measuring applications. Fully hardened stainless steel construction with an anti-glare, satin chrome finish. All measuring surfaces are ground and lapped for ...
Graduated 0.001in./0.01mmAccurate to BS870Steel spindles with ground threads ...
Description:
Graduated 0.001in./0.01mmAccurate to BS870Steel spindles with ground threads and measuring faces tipped with hard micro-lapped tungsten carbidePositive spindle lock fittedThimble is fitted with a ratchet stop to ensure a constant measuring force and consistent readings.