RS PRO High Power Series Metal Oxide Varistor 2.05nF, Clamping 1050V, Varistor 610V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Metal Oxide Varistors High Power

High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications.

Single and two-hole fixing types for distribution bus-bar mounting
Insulated plastic case types for flat surface mounting
High-mass large-diameter zinc oxide element
Repeatable protection against high-energy transient voltages
Operating Temperature Range: -40°C → +85°C

Specificaties
Kenmerk Waarde
Varistor Voltage 610V
Maximum AC Voltage Rating 420V
Maximum DC Voltage Rating 560V
Clamping Voltage 1050V
Energy 310J
Series High Power
Diameter 36mm
Maximum Surge Current 12000A
Capacitance 2.05nF
Thickness 5.5mm
Dimensions 36 (Dia.) x 5.5mm
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,55
(excl. BTW)
13,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
11,55 €
10 - 24
11,09 €
25 - 49
10,63 €
50 - 99
10,16 €
100 +
9,70 €
Related Products
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. ...
Description:
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. Suppression of inductive switching or other fast electrical transient events makes these devices useful in helping to achieve electromagnetic compliance of end products. Suitable for on-board transient voltage protection of ...
AVX High Temperature 175°C Multi-Layer Varistors are designed ...
Description:
AVX High Temperature 175°C Multi-Layer Varistors are designed for under hood and other high temperature automotive or industrial applications. They offer bi-directional overvoltage protection as well as EMI/RFI attenuation in a single SMT package. This allows designers the ability to ...
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...