Cypress Semiconductor CY15FRAMKIT-001, Ferroelectric RAM (FeRAM) Arduino Shield

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CY15FRAMKIT-001 Serial F-RAM Development Kit (Arduino-Compatible)

The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development kit for high-performance, high-reliability and energy efficient serial F-RAM devices.
The CY15FRAMKIT-001 kit has been designed to operate with the Arduino UNO R3 board with stackable connectors.

Compatible with CY8CKIT-042, CY8CKIT-042-BLE and CY8CKIT-040 kits
256 Kbit SPI F-RAM and a 256 Kbit I²C F-RAM
Power supply operation at 3.3 V or 5.0 V

FRAM (Ferroelectric RAM)

FRAM (Ferroelectric Random Access Memory) is a non-volatile memory that uses ferroelectric film as a capacitor for storing data. Possessing characteristics of both ROM and RAM devices, F-RAM features high-speed access, high endurance in write mode, low power consumption, non-volatility, and excellent tamper resistance. It is therefore ideal memory for use in smart cards which need high security and low power consumption, as well as cellular phones and other devices.

Specificaties
Kenmerk Waarde
Memory Technology Ferroelectric RAM (FeRAM)
Kit Classification Arduino Shield
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
26,93
(excl. BTW)
32,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,93 €
Related Products
The Vinculo is a dual channel USB Host/Device ...
Description:
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and ...
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...
4 Kbit and 16 Kbit I²C serial EERAM ...
Description:
4 Kbit and 16 Kbit I²C serial EERAM devicesFollows the published recommended capacitor selection for the EERAM deviceTest points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and 5V operationOn-board ...
The Flash Click is an accessory board for ...
Description:
The Flash Click is an accessory board for adding flash memory. It features EN25F80 with 8 Mbit serial Flash memory module and advanced hardware write-protection mechanisms. It supports high-performance commands for clock frequency up to 75 MHz. The memory is ...