Festo Pneumatic Regulator G 1/2, G 3/4

  • RS-stocknr. 175-2177
  • Fabrikantnummer FR-8-1/2
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IN
Productomschrijving

Festo Distributor Block

The Festo FR-8 series aluminium die cast distributor block has port connections of 1/2, 3/4 and a thread standard is G. It has 8 number of output ports and a single supply lines. This component is used on mounting frames, as a manifold, or accumulator and as an additional reservoir for timers.

Features and Benefits

• Operating pressure of 0bar to 16bar
• Operating temperature ranges between -10°C and 60°C

Certifications

• ISO8573-1:2010

Specificaties
Kenmerk Waarde
Manufacturer Series FR-8
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
109,56
(excl. BTW)
132,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
109,56 €
Related Products
A single sub-base for use with the two-hand ...
Description:
A single sub-base for use with the two-hand safety start, impulse generator and adjustable time delay. Push-in connectors at the rear for 4mm tubing.
A range of pneumatic tube bulkhead adaptors and ...
Description:
A range of pneumatic tube bulkhead adaptors and multiple-outlet fittings, all featuring nitrile rubber ’O’ rings for optimum sealing and a working temperature range of -20 to + 80°C.
Festo NAV Series Sub bases for individual mounting ...
Description:
Festo NAV Series Sub bases for individual mounting and installation of pneumatic control valves. NAV bases are manufactured from die-cast aluminium with a port pattern to suit ISO 15407-1. Connections are on the side of the sub-base.
The VABM manifold rails are for pneumatic linking ...
Description:
The VABM manifold rails are for pneumatic linking of VUVG valves. • Assembly in any position• Corrosion resistance class 2 (moderate corrosion stress)• Through-hole mounting• RoHS compliant• Wrought aluminium alloy manifold strip• Semi in-line and sub-base valve options available.