Red Lion Barrel NPN Inline Amplifier, 9 → 30 V dc

  • RS-stocknr. 905-5254
  • Fabrikantnummer ASTC0000
  • Fabrikant Red Lion
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

ASTC Series Inline Pre Amplifier

The ASTC In-Line amplifier boosts magnetic pickup signals by a factor of more than 100, and also provides an NPN Open-Collector pulse output. Low speed input sensitivity is 20 millivolts which permits operation at 1/50th of the 1-Volt. The unit is epoxy-encapsulated in a 3/4" Diameter stainless steel shell, with overall dimensions of 0.9" depth x 4.5" length and includes Neoprene strain-reliefs on each end. In installations where long signal runs are to be made it is advisable to keep the ASTC close to the magnetic pickup and make the longer cable run with the output from the ASTC. Input and output cables should not be run in conduit, cable troughs, or bundles with power or control voltage lines.

Ideal for long cable runs
Current sinking output
Ultra-low threshold speeds
Allows larger air gaps
High noise immunity
Epoxy encapsulated
Stainless steel shell
Neoprene strain reliefs
Input & output cable
Maximum operating frequency 10 KHz

ASTC Series In-Line Amplifier & Pulse Shaper for Magnetic Pickups

Red Lion

Specificaties
Kenmerk Waarde
Body Style Barrel
Output Type NPN
Terminal Type Wire Lead
Mounting Style Flush
Maximum DC Voltage 30V
Supply Voltage 9 → 30 V dc
Housing Material Stainless Steel
Maximum Output Current 40mA
Dimensions 22.9 (Dia.) x 114.3 mm
Maximum Operating Temperature +60°C
Length 114.3mm
Width 22.9mm
Minimum Operating Temperature -18°C
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
81,91
(excl. BTW)
99,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
81,91 €
5 - 9
77,82 €
10 +
73,72 €
Related Products
The Advanced Fiber Amplifier Units That Handles On-site ...
Description:
The Advanced Fiber Amplifier Units That Handles On-site Needs. Improved basic performance with 1.5 times the sensing distance and approx. 1/10th the minimum sensing object.Ultra-easy setup with Smart Tuning with a light intensity adjustment range expanded 20 times to 40,000:1. ...
Magnetic cylinder sensors are used for detection, measuring ...
Description:
Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body materialSuitable for T-slot and round-slot cylindersPNP NO or reed switchPNP output types have short circuit and reverse polarity protectionLED status display.
Stainless steel and PA12 plastic construction protected to ...
Description:
Stainless steel and PA12 plastic construction protected to IP67 Inserted directly into cylinder’s dovetail, fixed with a single stainless steel clamping screw Overload, short circuit and reverse polarity protection LED Status Display.
Sensor for pneumatic cylindersRecords the ring magnets in ...
Description:
Sensor for pneumatic cylindersRecords the ring magnets in the cylinder pistonsPrecise recording of position by means of accurate switching pointsOutput: N/OOutput current max. 100 mAResponse threshold 2.1 mTTraverse speed > 10 m/sPolarity reversal protectionLED status displayConnection lead with plug ...