Telemecanique Sensors XY2CZ513 Rope Pull Cable Clamp, For Use With XY2C Rope Pull Switch

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Telemecanique XY2CZ Rope Pull Accessories

Cables (galvanised with a red sheath)

A range of accessories to support the Preventa XY2C rope pull switches.

3.2mm dia. 609-1967, 609-1973, 609-1989 & 609-1995 for use with XY2CJ and XY2CH
5mm dia. 609-1945 & 609-1951 for use with XY2CE

Tensioner

837-1186 for use with XY2CJ

Turnbuckles

M6 x 60 + locknut, 251-2612 for use with all models
M8 x 70 + locknut, 609-2005 for use with all models

Cable Grips

Single, 305-1297 for use with 3 to 5mm diameter cable
Double, 305-1304 for use with 3 to 5mm diameter cable

Cable Supports

Fixed 251-2606 for use with all models
Pulley support 305-1354 for use with all models

End Spring

609-2011 for use with XY2CJ and XY2CH

Specificaties
Kenmerk Waarde
Accessory Type Rope Pull Cable Clamp
For Use With XY2C Rope Pull Switch
Size 3 5mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
4,90
(excl. BTW)
5,93
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
4,90 €
49,00 €
100 - 140
4,763 €
47,63 €
150 +
4,634 €
46,34 €
*prijsindicatie
Related Products
The use of a turnbuckle and spring is ...
Description:
The use of a turnbuckle and spring is not suitable for emergency stop model type XY2-CH.Cable assembly kit includes: 1 x galvanised cable, Ø 3.2 mm.1 x cable clip XY2-CZ523; 1 x end spring XY2-CZ703.
Supplied with all fittings and fixtures required to ...
Description:
Supplied with all fittings and fixtures required to install any rope pull switch, including hazardous area versionsStainless steel grade 316 and the cable is multi-strand galvanised steel covered with PVCTwo thimbles, collar clamps and "D" shackles are provided for securing ...
The Allen Bradley GuardMaster 5m lifeline rope tensioner ...
Description:
The Allen Bradley GuardMaster 5m lifeline rope tensioner system is the newest tech accessory for use with 440E rope pull switch. It is a unique cable (rope) tensioning system that enables quicker installation of cable-actuated systems.Supplied with1 tensioner, 2 grippers, ...
The 3SE7 series of grab wire switches (trip ...
Description:
The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.As the effective range of a grab wire switch is only limited by the ...