Schneider Electric XPSMCTS32 Screw Terminal Connector Kit

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

XPS MC, Configurable Safety Controllers, Base Units

Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.

8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.

Note

Stock numbers 464-946 and 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set
To connect XPS-MC to a PC for programming and diagnostic purposes:
Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490
Laptop PC with USB port: use RS 464-962 and RS 218-080

Specificaties
Kenmerk Waarde
Accessory Type Screw Terminal Connector Kit
For Use With XCSMC16Z Safety Controller, XCSMC16ZC Safety Controller, XCSMC16ZP Safety Controller
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 70,70 €
63,63
(excl. BTW)
76,99
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
63,63 €
10 - 14
61,03 €
15 +
58,36 €
Related Products
Supplied with all fittings and fixtures required to ...
Description:
Supplied with all fittings and fixtures required to install any rope pull switch, including hazardous area versionsStainless steel grade 316 and the cable is multi-strand galvanised steel covered with PVCTwo thimbles, collar clamps and "D" shackles are provided for securing ...
The Allen Bradley GuardMaster 5m lifeline rope tensioner ...
Description:
The Allen Bradley GuardMaster 5m lifeline rope tensioner system is the newest tech accessory for use with 440E rope pull switch. It is a unique cable (rope) tensioning system that enables quicker installation of cable-actuated systems.Supplied with1 tensioner, 2 grippers, ...
Innovative rope tensioning system compatible with most rope ...
Description:
Innovative rope tensioning system compatible with most rope switchesEnables speedy installation of grab wire switchesRope tensioned by turning the setting bolt on the tensioner with a hexagon key.
A range of accessories to support the Guardian ...
Description:
A range of accessories to support the Guardian Line rope pull switches. 826-4136, 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key826-4145, 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key826-4148, 15m rope kit, 7 eyebolts, 1 tensioner/gripper, ...