Megger LTW325 Loop Impedance & RCD Combined Tester, Loop Impedance Test Type 2 Wire 440V, RCD Test Type AC Selective

  • RS-stocknr. 238-139
  • Fabrikantnummer LTW325
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

LTW 300 Series

Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3 phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10 second non trip loop test time with Auto test extension up to a further 10 seconds if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected; no need to press the test button means much safer testing
PFC Display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
IP54 Weatherproof case
Optional 10A fused 2 wired test leads and crocodile clip set
Complies with IEC61010-1 300V CATIV safety standard and meets EN61557

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Calibrated UKAS
Maximum Voltage Measurement 440V
RCD Test Type AC Selective
Best Loop Test Accuracy ±10%
RCD Test Current 4A
Non-Trip Loop Test Yes
Safety Category CAT IV 300 V, IEC 61010
Display Type LCD
Battery Life 2000 Tests
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 1kg
Height 78mm
Safety Category Voltage 300V
Length 203mm
Width 148mm
Maximum Operating Temperature +50°C
Model Number p LTW325
Minimum Operating Temperature -10°C
Safety Category Level CAT IV
3 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
830,50
(excl. BTW)
1.004,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
830,50 €
Related Products
A device designed to easily measure earth resistance ...
Description:
A device designed to easily measure earth resistance (in TT), monitor continuities and check installations (on standard 2P + T plugs or B.T. panels).On its dual-colour LCD screen, the Catohm NG clearly and instantly displays the correct plug connection, as ...
4 pole earth tester for measuring soil resistivity ...
Description:
4 pole earth tester for measuring soil resistivity and resistance of earth rods and associated installations. Supplied in a hard carry case together with auxiliary stakes and cables.,An ICLAMP selective clamp is available separately, and when used with the DET4TC ...
Electrical testers to be used on motors, generators, ...
Description:
Electrical testers to be used on motors, generators, cables, or switch gear,the tester line is designed to be safe, simple to use and gimmick-free. A perfect solution for troubleshooting, commissioning, and preventative maintenance applications. Meets IEC10101, CATIII 1000VLarge dual display ...
DET24C Additional Features. Ground resistance range : 0.050 ...
Description:
DET24C Additional Features. Ground resistance range : 0.050 Ω to 1500 ΩTrue RMS Ground leakage current range : 0.2 mA to 35 AAuto ranging & HOLD function4 digit plus 6 digit backlit LCD displayHigh and low resistance alarms256 test results ...