ABB Liquid Level Relay - DIN Rail Mount, Screw Mount, Snap-On, 24 V ac Input

  • RS-stocknr. 746-7469
  • Fabrikantnummer 1SVR430851R9200
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Up/Down Liquid Level Relay - ABB CM-ENN

ABB Up/Down Liquid Level Relays are specifically designed to monitor the filling and draining of liquid levels within tanks. The units offer a switchable function (for filling or draining selection). Overflow or dry-running protection is also a selectable option. The units work by measuring the change in resistance sensed by a single-pole electrode.

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specificaties
Kenmerk Waarde
Mounting Style DIN Rail Mount, Screw Mount, Snap-On
Probe Voltage 30V ac
Supply Voltage 24 V ac
Overall Length 109.5mm
Overall Width 22.5mm
Overall Depth 78mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
91,24
(excl. BTW)
110,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
91,24 €
Related Products
iTL impulse relays are used to control by ...
Description:
iTL impulse relays are used to control by pushbuttons lighting circuits consisting of incandescent lamps, low-voltage halogen lamps, fluorescent lamps and discharge lamps. Closing of the impulse relay pole is triggered by an impulse on the coilHaving two stable mechanical ...
The Finder step relay is an AC powered ...
Description:
The Finder step relay is an AC powered double phase modular latching device with one NO and one NC contact and switching current 16A. On each successive energisation of the relay coil, this contacts change state thus providing a step ...
The MultiTrode indicator probe provides continuous level indication ...
Description:
The MultiTrode indicator probe provides continuous level indication and pump control. The probe can be connected to a PLC or dedicated pump controller system. The 10 digital outputs provide a mechanism for simple pump control without any other control device. ...
The Carlo Gavazzi conductive microprocessor-based level controller is ...
Description:
The Carlo Gavazzi conductive microprocessor-based level controller is designed for liquids with a wide sensitivity range (like sewage water, chemicals, saltwater etc.). This controller has a separate output for alarm indication in case of a tank running dry or if ...