Brodersen Controls Level Relay - DIN Rail Mount, 24 V dc 2 Input

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

MXL-10 Level Relays

Monitoring / control level relay for conductive fluids. With a two or three wire probe, one or two levels in a container can be controlled
Signal at maximum and minimum levels
Sensitivity adjustable on input 5 to 50kΩ
Response time adjustable from 0.1 to 5 seconds
Ambient temperature; -20 to +55°C
Automatic locking (latch)
LED supply and output indications
35mm DIN rail mounting
W22.5 x H80 x D104mm
Protection IP 20

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specificaties
Kenmerk Waarde
Number of Inputs 2
Mounting Style DIN Rail Mount
Probe Voltage 12V ac
Supply Voltage 24 V dc
Overall Length 104mm
Overall Width 22.5mm
Overall Depth 80mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
27 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
102,33
(excl. BTW)
123,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
102,33 €
Related Products
A series of liquid level control relays from ...
Description:
A series of liquid level control relays from ABB for conductive liquids. The CM-ENS range gives a choice of 3 variants each with a compact, space saving housing with the highest fire protection and environmentally friendly materials. Installation is quick ...
Maximum Liquid Level Relays may be used to ...
Description:
Maximum Liquid Level Relays may be used to monitor when liquid media reaches or falls below the desired level in a tank/vessel. The units are often employed for use within pumped control systems, overflow monitoring applications and dry running protection. ...
Minimum Liquid Level Relays monitor the minimum liquid ...
Description:
Minimum Liquid Level Relays monitor the minimum liquid level, often used within pumped control systems and for overflow monitoring applications. Monitoring and control of liquid levelsProtection of pumps against dry runningAbility to detect liquid leaks in a systemControl of media ...
Maximum/Minimum Liquid Level Relays are suitable for a ...
Description:
Maximum/Minimum Liquid Level Relays are suitable for a number of applications including fill and drain monitoring of tanks. Single-pole electrodes sense a change in resistance, energising the circuit if the liquid exceeds the maximum level, and de-energising if the liquid ...