Flowline LI40 Series Level Controller - Panel Mount 1 Sensor Input Digital

  • RS-stocknr. 124-0114
  • Fabrikantnummer LI40-1001
  • Fabrikant Flowline
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Flowline EchoPod Digital Level Indicator

EchoPod PodView general purpose tank level display from Flowline provides the user with a robust level indication solution. PodView requires no extensive programming so setup is simple, and can be used in a variety of applications

Features and Benefits

Designed to indicate tank level or volume, along with relay status
Compatible with V50 firmware, and can be downloaded via Flowline's free WebCal software
Remote monitoring up to 4.5m distance between the PodView &

Flowline Sensors

Specificaties
Kenmerk Waarde
Number of Inputs 1
Mounting Style Panel Mount
Overall Length 85.5mm
Overall Width 78.6mm
Overall Depth 17mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Input Type Sensor
Output Type Digital
Termination Type Screw
IP Rating IP65
Standards Met CE, NEMA 4
Number of Outputs 1
Series LI40
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
204,60
(excl. BTW)
247,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
204,60 €
Related Products
The K7L-AT50 liquid leakage sensor amplifier by Omron ...
Description:
The K7L-AT50 liquid leakage sensor amplifier by Omron can detect a wide variety of liquids ranging from water to chemicals with low conductivity. It internally oscillates AC signals provided to the Sensing Band, protecting it from electric corrosion and ensuring ...
The K7L-AT50 liquid leakage sensor amplifier by Omron ...
Description:
The K7L-AT50 liquid leakage sensor amplifier by Omron can detect a wide variety of liquids ranging from water to chemicals with low conductivity. It internally oscillates AC signals provided to the Sensing Band, protecting it from electric corrosion and ensuring ...
Facilitates low-interference transmission of the sensor signal from ...
Description:
Facilitates low-interference transmission of the sensor signal from a combination electrode across large distancesRecommended from a lead length of approx. 15 mEasy assembly between combination electrode and connection cable for pH and redox electrodesMains-independent operation.
Accepts any 4 to 20mA or HART compatible ...
Description:
Accepts any 4 to 20mA or HART compatible inputSupply voltage115/240Vac with Intrinsically safe 24Vdc power supply to the transmitterTwo voltage free contact closure inputsPre-programmed tank shapes, flow algorithms and pump control routinesTwenty-point set up facility for non-standard applications.Real time ...