STMicroelectronics ST1CC40DR LED Driver IC, 3 → 18 V dc 3A 8-Pin SOIC

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

LED Drivers, Buck Current Regulators for LED, STMicroelectronics

The step down switching regulators are simple and efficient that offer high input voltage capability. They deliver current outputs up to 4 A with high switching frequency for driving high-brightness LEDs.

LED Drivers, Lighting ICs, STMicroelectronics

Specificaties
Kenmerk Waarde
Output Current 3A
Input Voltage 3 → 18 V dc
AC or DC Input Voltage Dc
Dimming Operation DC Voltage
Maximum Output Power 2W
Application Battery Charger, Emergency Lighting, General Lighting, High Brightness LED driving, Signage
Package Type SOIC
Number of Pins 8
Maximum Output Voltage 18V
Minimum Output Voltage -1V
2090 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (Supplied on a Reel) Quantities below 150 on continuous strip
1,548
(excl. BTW)
1,873
(incl. BTW)
Aantal stuks
Per stuk
25 - 45
1,548 €
50 - 120
1,466 €
125 - 245
1,384 €
250 +
1,318 €
Verpakkingsopties
Related Products
The Power Integrations LYTSwitch-4 family of off-line AC-DC ...
Description:
The Power Integrations LYTSwitch-4 family of off-line AC-DC single-stage converters are designed for high-power LED driver applications. They integrate control and drive circuits and power factor correction in a single package and are available in both dimming and non-dimming versions. ...
The LYTSwitch-5 family of AC-DC Converters from Power ...
Description:
The LYTSwitch-5 family of AC-DC Converters from Power Integrations is ideal for single-stage power factor corrected constant current LED applications, equally suited for lamps, tubes or ballasts. These highly integrated devices incorporate a discontinuous mode, variable frequency, variable on-time controller, ...
BU2099FV incorporates a built-in shift register and a ...
Description:
BU2099FV incorporates a built-in shift register and a latch circuit to control 12 LED by serial interface, linked to a microcontrollers. LED can be driven directly. (Output current 25mA)12 bit parallel outputOperational on low voltage (2.7V to 5.5V)Applications:MFP(Multi Function Printer)Air-conditionerSTB ...
The ROHM BD9486F series is a high-efficiency LED ...
Description:
The ROHM BD9486F series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel. It has a boost DC-DC converter that employs an array of LEDs as the light source. This driver has some protective ...