LED1202QTR, LED Lighting Driver

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The STMicroelectronics LED1202 is a 12-channel low quiescent current LED driver. Its output current can be adjusted separately for each channel by 8-bit analogue and 12-bit digital dimming control. A common clock domain can be shared for timing synchronization. The device includes thermal shutdown and open LED detection for multi-device applications. The LED driver is available in WLCSP20 package 1.71 x 2.16 x 0.5 mm with 0.4 mm pitch and in QFN20 3x3 package 3 x 3 x 0.6 mm with 0.5 mm pitch.

Slow turn-on and turn-off time
Improves the system low noise generation performance
Phase shifting function helps to reduce the inrush current
8 configurable I²C slave addresses plus global address

Specificaties
Kenmerk Waarde
Output Current 20µA
Input Voltage 2.6 V, 5 V
AC or DC Input Voltage Dc
Dimming Operation 1-10 V
Package Type QFN
Number of Pins 20
1000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (Supplied on a Reel) Quantities below 150 on continuous strip
1,432
(excl. BTW)
1,733
(incl. BTW)
Aantal stuks
Per stuk
50 - 95
1,432 €
100 - 495
1,006 €
500 - 1995
0,974 €
2000 +
0,75 €
Verpakkingsopties
Related Products
The ROHM BD9486F series is a high-efficiency LED ...
Description:
The ROHM BD9486F series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel. It has a boost DC-DC converter that employs an array of LEDs as the light source. This driver has some protective ...
The CL88020 LED Driver Integrated Circuit (IC) is ...
Description:
The CL88020 LED Driver Integrated Circuit (IC) is an off-line sequential linear LED driver designed to provide 8.5W of LED power from a 120 VAC nominal input voltage. CL88020 is designed to drive a long string of inexpensive, low-current LEDs ...
The HV9912 is a current mode control LED ...
Description:
The HV9912 is a current mode control LED driver IC designed to control single switch PWM converters (buck, boost, buck-boost or SEPIC) in a constant frequency mode. The controller uses a peak current-mode control scheme with programmable slope compensation and ...
The CL6 is a fixed, linear current regulator ...
Description:
The CL6 is a fixed, linear current regulator designed for driving high brightness LEDs at 100mA from nominal 12V, 24V, or 48V supplies. With a maximum rating of 90V, it is able to withstand transients without the need for additional ...