STEVAL-ILL084V1, LED Evaluation Kits

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The STEVAL-ILL084V1 product evaluation board is based on the LED6000 monolithic current source for high power LED driving. The floating boost topology can benefit from the LED6000 wide input voltage range to drive many power LED in series. The LED6000 is a 61 V asynchronous switching regulator with embedded power MOSFET, designed to supply up to 3 A DC currents depending on the application conditions. The 250 mV typical RSENSE voltage drop, embedded switch-over feature on the VBIAS pin and light load management (pulse skipping) maximize power conversion efficiency across the entire load range. Digital dimming is implemented by driving the dedicated DIM pin. The current limit threshold and the switching frequency are adjustable for application optimization. The device includes an internal 250 kHz oscillator that can be externally adjusted up to 1.5 MHz. The size of the overall application is minimized thanks to the high switching frequency and its compatibility with ceramic output capacitors.

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With High Power LED
Featured Device LED6000
Kit Name STEVAL
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,18
(excl. BTW)
28,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,18 €
Related Products
The STEVAL-ILL061V1 is a high brightness RGB LED ...
Description:
The STEVAL-ILL061V1 is a high brightness RGB LED array driver system evaluation board with local dimming and diagnostics based on LED1642GW independent PWM LED driver controlled through an STM32 microcontroller SPI interface. An ST L7981 DC-DC converter provides the voltages/power ...
The STEVAL-ILL075V1 evaluation board is designed to help ...
Description:
The STEVAL-ILL075V1 evaluation board is designed to help familiarize the user with the STLUX family of digital controllers and their innovative SMED (state machine, event driven) architecture. A convenient GUI enables the user to quickly generate the optimal SMED configuration ...
This board implements an offline power converter based ...
Description:
This board implements an offline power converter based on a single stage high-PF flyback topology using the HVLED001A controller. A very slim form factor is achieved with innovative magnetic componentry. The output voltage is controlled by the primary side, thus ...
The Texas Instruments TM4C123 launchpad evaluation kit is ...
Description:
The Texas Instruments TM4C123 launchpad evaluation kit is a low-cost evaluation platform for ARM Cortex-M4F based microcontrollers. The design of this launchpad highlights the TM4C123GH6PM microcontroller with a USB 2.0 device interface and hibernation module. Two Controller Area Network (CAN) ...