STEVAL-ILL076V2, LED Evaluation Kits

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

This board implements an offline power converter based on a single stage high-PF flyback topology using the HVLED001A controller. A very slim form factor is achieved with innovative magnetic componentry. The output voltage is controlled by the primary side, thus reducing the need for costly opto-couplers. The HVLED001A PSR precision and the innovative structure of the transformer makes for highly accurate output voltage regulation against load and line changes. A very high efficiency is obtained and a full set of protections including output short circuit and input overvoltage is included. Power factor and THD are optimized to be respectively higher than 0.95 and lower than 10% at full load over the entire input voltage range. The main application for this converter is for bus power supplies in a LED string driver providing 4 kV isolation.

Specificaties
Kenmerk Waarde
LED Technology LED
For Use With High Power LED
Featured Device HVLED001A
Kit Name STEVAL
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
99,29
(excl. BTW)
120,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
99,29 €
Related Products
The B-G474E-DPOW1 Discovery kit is a digital power ...
Description:
The B-G474E-DPOW1 Discovery kit is a digital power solution and a complete demonstration and development platform for the STMicroelectronics STM32G474RET6 microcontroller. Leveraging the new HRTimer-oriented features, 96 Kbytes of embedded RAM, math accelerator functions and USBPD 3.0 offered by STM32G474RET6, ...
The purpose of the STEVAL-ILL054V1 evaluation board is ...
Description:
The purpose of the STEVAL-ILL054V1 evaluation board is aid in the evaluation of the LED2001, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter. The LED2001 is designed to operate as a precise constant current source with an adjustable ...
The STEVAL-ILL056V1 is a product evaluation board based ...
Description:
The STEVAL-ILL056V1 is a product evaluation board based on the LED5000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter designed to operate as a precise constant current source with an adjustable current capability up to 3 A DC. ...
The STEVAL-ILL061V1 is a high brightness RGB LED ...
Description:
The STEVAL-ILL061V1 is a high brightness RGB LED array driver system evaluation board with local dimming and diagnostics based on LED1642GW independent PWM LED driver controlled through an STM32 microcontroller SPI interface. An ST L7981 DC-DC converter provides the voltages/power ...