STEVAL-ILL051V2, LED Evaluation Kits

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The purpose of the STEVAL-ILL051V2 evaluation board is to aid in the evaluation of the LED2000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter. The LED2000 is designed to operate as a precise constant current source with an adjustable current capability up to 3 A DC. The embedded PWM dimming circuitry features LED brightness control. The regulated output current is set by connecting a sensing resistor to the feedback pin.
The size of the overall application is minimized thanks to the high switching frequency and ceramic output capacitor compatibility.
The device is fully protected against overheating, overcurrent and output short-circuit.

3.0 V to 18 V operating input voltage range
850 kHz fixed switching frequency
100 mV typical current sense voltage drop
PWM dimming
±7% output current accuracy
Synchronous rectification
Internal current limiting
Thermal shutdown

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With LED Driver
Featured Device LED2000
Kit Name STEVAL
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,58
(excl. BTW)
33,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
27,58 €
Related Products
The Texas Instruments CC2531EMK kit provides one CC2531 ...
Description:
The Texas Instruments CC2531EMK kit provides one CC2531 USB Dongle and documentation to support a PC interface to 802.15.4/ZigBee applications. The dongle can be plugged directly into computer and can be used as an IEEE 802.15.4 packet sniffer or for ...
The B-G474E-DPOW1 Discovery kit is a digital power ...
Description:
The B-G474E-DPOW1 Discovery kit is a digital power solution and a complete demonstration and development platform for the STMicroelectronics STM32G474RET6 microcontroller. Leveraging the new HRTimer-oriented features, 96 Kbytes of embedded RAM, math accelerator functions and USBPD 3.0 offered by STM32G474RET6, ...
The STEVAL-ILL053V2 evaluation board implements a 130 W ...
Description:
The STEVAL-ILL053V2 evaluation board implements a 130 W LED power supply for street lighting. The circuit is composed of two stages: a front-end PFC using the L6562AT, and an LLC resonant converter based on the L6599AT.The strengths of this design ...
The STEVAL-ILL061V1 is a high brightness RGB LED ...
Description:
The STEVAL-ILL061V1 is a high brightness RGB LED array driver system evaluation board with local dimming and diagnostics based on LED1642GW independent PWM LED driver controlled through an STM32 microcontroller SPI interface. An ST L7981 DC-DC converter provides the voltages/power ...