MT2 Lathe Chuck with 6, 10, 12, 16 mm Collets

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Autolock S-Milling Cutter Chuck

Supplied in a metal storage box, complete with collets
Metric chucks are supplied with 6, 10, 12, 16mm collets, enabling them to hold any cutter from 1.5 to 20mm diameters
Imperial chucks have 1/4, 3/8, 1/2, 5/8 inch collets, making them suitable to hold any cutter from 1/16 to 25/32 inch diameters
Self-centring & automatic locking, this ensures the cutter is unable to slip, pull out, or push back
The heavier the cut applied to the material, the tighter the grip produced on the milling cutter.

Specificaties
Kenmerk Waarde
Lathe Part Lathe Chuck
Taper Size MT2
2 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Kit
396,56
(excl. BTW)
479,84
(incl. BTW)
Kit(s)
1 +
396,56 €
Related Products
RS Pro keyless drill chuck designed to be ...
Description:
RS Pro keyless drill chuck designed to be used with impact drills and DC/AC Electrical drills. • Metal sleeve• Locking mechanism - rotate sleeve to tighten• Applicable for impact drill and DC/AC electrical drill.
Drill chuck for stationary, handheld and impact drillsAdapter ...
Description:
Drill chuck for stationary, handheld and impact drillsAdapter for 1/2" x 20 mm drill spindles.
RS Pro External Dead Centres, used to support ...
Description:
RS Pro External Dead Centres, used to support the workpiece at either the fixed or rotating end of the machine. The tips of the centres have an insert of carbide which reduces the friction and allow for faster speeds. • ...
RS Pro Carbon Tipped Dead Centres, used to ...
Description:
RS Pro Carbon Tipped Dead Centres, used to support the workpiece at either the fixed or rotating end of the machine. The tips of the centres have an insert of carbide which reduces the friction and allow for faster speeds. ...