Lamp Dismantling Tool - 3SB2908-2AB

  • RS-stocknr. 612-9927
  • Fabrikantnummer 3SB2908-2AB
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

3SB2 - Accessories

Switching element

N/O or N/C contact
For inserting the holder or lamp holder

The 3SB2 range from Siemens offers various accessories to accompany the pilot devices including, Incandescent lamps, fixing collars and holders for contact blocks.

24 V / 1 W
With wedge base W 2 x 4.6 d

Plug connector

Push-on terminal for male tab 2.8 x 0.8 mm
Insulating sleeve for male tab, may be pushed on from the front

Backing plate

Yellow, 50 mm
Self adhesive
Without label or
With "EMERGENCY STOP" label

Tool

Removal tool for holder and lamp holder with holder
Lamp gripper for lamps with W2 x 4,6 d base

Approvals

  CE

3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 3,69 €
3,14
(excl. BTW)
3,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
3,14 €
5 - 9
3,00 €
10 +
2,90 €
Related Products
Twin tungsten halogen lampholder designed for use with ...
Description:
Twin tungsten halogen lampholder designed for use with a 500W R7s fitting (118mm). Rated at 6A, 250V. Screw fixingWires: Cu, nickel plated0.75 square mm, with ferruleInsulation: PTFECable length: 220 mm.
Lamp holder for low voltage halogen lamps, rated ...
Description:
Lamp holder for low voltage halogen lamps, rated at 10A, 50V. The lamp holder should be fixed prior to use. Rear cable entry connectionWires: Cu, tin-plated, 0.75 square mm, with ferruleInsulation: silicone (max 180°C)Free cable length: 140 mmScrew fixingCeramic / ...
Spring fittings for halogen tungsten bulbs.Aluminium body, insulating ...
Description:
Spring fittings for halogen tungsten bulbs.Aluminium body, insulating section in steatite, stainless steel coil spring.Available in screw version (5100 / SIV) or bracket version for panel mounting using M4 screws(5100 / SQ80).To ensure the correct operation of contacts, the two ...
Black, thermohardening resin sockets for E14 and E27 ...
Description:
Black, thermohardening resin sockets for E14 and E27 bulbs, 60 W maximum, supplied as 3 pre-screwed parts.Copper alloy ferrule; cap with threaded M10 metal connector with stopper and anti-rotation locking screw.Half-threaded sleeve with ferrule in insulating material.The corresponding rings must ...