Siemens Inverter Drive, 3-Phase In, 0 550Hz Out 4 kW, 400 V, 8.8 A SINAMICS G120C, IP20, ModBus

  • RS-stocknr. 791-8636
  • Fabrikantnummer 6SL3210-1KE18-8UB1
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

SINAMICS G120C - Compact Inverters & Accessories

SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications.
The inverter drives are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.

Features & Benefits

G120C with a compact design
Side-by-side design
High power density, low envelope dimensions
Simple installation, Low space requirement
Use in small control cabinets, close to the machine
Optimized parameter set
Optimized commissioning
BOP-2 or IOP operator panels can be used
Integrated USB connection
Simple and fast software parameter assignment
Simple to use during commissioning and in operation
High degree of service friendliness, simple maintenance
Plug-in terminals
Cloning function using BOP-2 or SD card
Operating hours counter for "drive on" and "motor on"
Fast mechanical installation
Intuitive standard commissioning
Energy-efficient, sensorless vector control
Automatic flux reduction with V/f ECO
Integrated energy saving computer
Safety Integrated (STO)
Integrated communication interfaces
Coated modules
Operation up to an ambient temperature of 60° (please see derating data)

Siemens Sinamics G120C Range

Specificaties
Kenmerk Waarde
Power Rating 4 kW
Phase 3
Supply Voltage 400 V
Current Rating 8.8 A
Output Frequency 0 550Hz
Ambient Temperature 0 +40°C
Overall Width 195mm
Overall Length 73mm
Overall Depth 200mm
Control Panel Yes
Field Bus Communication Type Modbus
Series SINAMICS G120C
IP Rating IP20
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/05/2020, met een levertijd van 1 werkdag.
Prijs Each
Was 729,00 €
666,00
(excl. BTW)
805,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
666,00 €
Related Products
The new Commander C series has been designed ...
Description:
The new Commander C series has been designed to be a simple and compact AC motor speed controller that meets advanced requirements in a wide range of applications and provides optimum user experience. Set just 4 parameters to get your ...
Note: An operator panel will be required to ...
Description:
Note: An operator panel will be required to operate this unit or to modify the factory set parameters. Micro processor controlled, using IGBT technology Simple to commission & set up Works straight from the box, using factory set defaults. To ...
The Siemens Micromaster 440 is an AC vector ...
Description:
The Siemens Micromaster 440 is an AC vector drive designed for automation applications that require broad functionality and dynamic response. The Micromaster 440 features an integrated brake chopper and has the ability to stop at a target position without an ...
A high-performance frequency converter with vector control for ...
Description:
A high-performance frequency converter with vector control for expanded and sophisticated control. High-performance vector control6 digital inputs3 digital outputs (relays)2 analogue inputs (that can also be used as digital inputs)2 analogue outputsIntegrated brake modulatorOverload capacity 200% Nominal current ...