Megger MIT230, Insulation Tester 999MΩ CAT III 300 V

  • RS-stocknr. 535-3191
  • Fabrikantnummer MIT230-EN
  • Warranty 3 jaar
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

MIT230 Insulation & Continuity Tester

The MIT230 incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.

Features & Benefits

Insulation testing to 1000 MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200 mA down to 0.01 Ω resolution
Automatic discharge of circuit under test
1 mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25 V
Auto-ranging analogue arc scale shows only the scale in use
Live circuit warning above 25 V, also inhibits insulation & continuity tests above 50 V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 min
Complies with IEC 1010-1 safety standard installation Category III, 600 V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Model MIT230
Test Voltage 250, 500V, 1000V
Test current on Load >1mA at minimum pass levels specified in BS7671, HD384, IEC364 & VDE0413 part 1
Insulation range 0.01MΩ to 1000MΩ on all ranges
Measuring accuracy ±(3% rdg +2d) to 10MΩ,
±(5% rdg +2d) to 100MΩ
Continuity Range 0.01Ω to 100.0Ω
Open circuit voltage 5V± 1V
Accuracy (20°C) <10Ω ±(3% rdg +2d)
>10Ω ±(5% rdg +2d)
Zero offset adjust 0 to 9.99Ω
Continuity buzzer Operates <5Ω
Voltage measurement range 25V to 600V @ 50/60Hz & dc
Accuracy 25V to 450V ac/dc ±(1% rdg +1d)
450V to 600V ac/dc ±(2% rdg +1d)
Operating temperature range -10 °C → +60 °C
Battery life 3500 x 5 sec tests (typ)
Dimensions / Weight 195 x 98 x 40 mm / 530g

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads, crocodile clips, carry case, instructions

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specificaties
Kenmerk Waarde
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300 V
Battery Type AA
Width 98mm
Weight 530g
Height 40mm
Length 195mm
Model Number p MIT230
Dimensions 195 x 98 x 40mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
96 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
479,05
(excl. BTW)
579,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
479,05 €
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
The HAL 101 offers simple straightforward operation in ...
Description:
The HAL 101 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Fast automatic production testing using sequence capabilityPerforms a.c./d.c. Flash and d.c. ...
PAT450 additional features:. Electrical equipment safety testing in ...
Description:
PAT450 additional features:. Electrical equipment safety testing in accordance with DIN VDE 0701-0702Fully configurable for fast testing and high productivity250V and 500V insulation tests and 200mA continuity testDifferential, substitute or touch leakage current tests with 10 μA resolutionLarge 5.7in. VGA ...