Insertion & Extraction Combination Tool Tab Contacts, HANDTOOL Series

  • RS-stocknr. 710-6537
  • Fabrikantnummer 63813-0400
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Molex Mini-Fit Sr. Crimp Contacts & Tooling

A range of male and female crimp contacts for use in Mini-Fit Sr connectors. The Mini-Fit Sr male crimp terminals are for use in Mini-Fit Sr cable and panel plug housings, see stock number 342-4162 typically. The Mini-Fit Sr. female crimp receptacles are use in the Mini-Fit Sr cable receptacle cousings, see stock number 342-4106 typically.
Two hand crimping tools are available: stock number 342-4320 for crimping 8 AWG terminals and stock number 342-4342 for crimping 10-12 AWG terminals. An insertion/extraction tool is also available, see stock number 710-6357

Molex Minifit Sr.™ Series

Current rating 49A
Voltage rating 250V
Contact resistance 1mΩ
Insulation resistance 1000 MΩ
Contact material Copper alloy
Contact plating Tin over nickel
Operating temperature -40°C to +105°C
Mechanical life 30 mating cycles (Tin plated)
Specificaties
Kenmerk Waarde
Contact Type Tab
Series HANDTOOL
Series Number T0201
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
125,35
(excl. BTW)
151,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
125,35 €
Related Products
The TE Connectivity 91285-1 is an insertion and ...
Description:
The TE Connectivity 91285-1 is an insertion and extraction tool set for AMPLIMITE HD-20 and HD-22 connector contacts. It is primarily designed for contact-to-housing applications. The 91285-1 tool comes with a selection of insertion and/or extraction tips which are interchangeable, ...
Suitable crimp tool having a small and large ...
Description:
Suitable crimp tool having a small and large cavity to crimp pin or socket contacts suitable for 0.08-0.22 mm² and 0.22-0.35 mm² stranded wires.,ITT extraction tool also available. Suitable for military, industrial or commercial applications and computer interfacing etc.
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...