1 Phase Surge Arrester, 1.2 kV, DIN Rail Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact Surge Arresters

Surge protection for the power supply with safe energy control

Varistor arrester free of leakage current
Extremely narrow design, just 12mm per position
Plug-in
Low voltage protection level of 1.5 kV
Optical and mechanical status indicator

Industrial Circuit Protection

Specificaties
Kenmerk Waarde
Voltage Protection Rating 1.2 kV
Series VAL-SEC-T2-1S-175-FM
Electrical Phase 1
Mounting Style DIN Rail
Impulse Discharge Current 40kA
Length 97.9mm
Width 25.4mm
Depth 74.5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
Dimensions 97.9 x 25.4 x 74.5 mm
Operating Temperature Range -40 → +80 °C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15/10/2020, met een levertijd van 1 werkdag.
Prijs Each
198,28
(excl. BTW)
239,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
198,28 €
10 - 24
182,42 €
25 - 49
176,67 €
50 - 99
167,74 €
100 +
159,42 €
Related Products
The CAMDENBOSS plastic enclosure kit with wall mounting ...
Description:
The CAMDENBOSS plastic enclosure kit with wall mounting capabilities and DIN rail is updated to fit the Raspberry Pi 4 module and Clear lid version. Available slot for display ribbon cablecut-outs are pre-cut into the caseTerminal guards to increase air ...
The Phoenix industrial surge protector has integrated status ...
Description:
The Phoenix industrial surge protector has integrated status protector with two wires . It suitable for maximum protection of sensitive equipment normally in harsh environments. It used polyamide material and its colour is grey. Its voltage protecting rate is 55V. ...
The Phoenix Contact Surge protection plug with integrated ...
Description:
The Phoenix Contact Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Its nominal voltage is 24 V DC. V-0 flammability rating according to UL 94PBT housing material5% to 95% Permissible humidity.
The Phoenix Contact Replacement plug for surge arresters ...
Description:
The Phoenix Contact Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths. 5 % to 95 % permissible humidity-40°C to 80°C ambient operative temperatureIP20 degree of protectionOptical Surge protection fault message.