Surge Arrester, 20kA, 350 V, DIN Rail Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Acti9 iPRD Quick Surge Arresters

Acti 9 iPRD DIN rail Surge Protector Devices are geared to absolute safety and improved continuity of service

Maximum discharge current 8 to 65 kA
Integrated disconnector for short-circuit current withstand, Isc, up to 25 kA
Maximum steady state voltage, Uc = 260, 440 V
Fixed or withdrawable surge arresters

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Maximum Surge Current 20kA
Range Acti 9
Voltage Protection Rating 350 V
Series iPRD
Mounting Style DIN Rail
Length 94mm
Width 72mm
Depth 75.9mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Dimensions 94 x 72 x 75.9 mm
Operating Temperature Range -25 → +60 °C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
264,04
(excl. BTW)
319,49
(incl. BTW)
Aantal stuks
Per stuk
1 +
264,04 €
Related Products
Professional range of Siemens accessories from the 3RT2 ...
Description:
Professional range of Siemens accessories from the 3RT2 series of contactors. Accessories include mechanical latches, magnet coils, terminal covers and contact pieces.
Suitable only for reset device set Z-FW-LP/MO and ...
Description:
Suitable only for reset device set Z-FW-LP/MO and Z-FW-LPD/MOExternal testing module with test resistor for FI devicesRegulation-compliant "external" test button function through design adapted for rated residual currentFor remote testing with a Z-FW-LP remote switching deviceContact breaker prevents hazardous ...
Ultra wide input voltage range: 200 - 1500VDCIndustrial ...
Description:
Ultra wide input voltage range: 200 - 1500VDCIndustrial grade operating temperature: -40℃ to +70℃4000VAC high isolation voltageHigh efficiency, Low ripple & noiseInput under-voltage protection, reverse input voltage protection, Output short circuit, over-current, over-voltage protectionUL 1741/CSA-C22.2 No.107.1, ...