Baumer PNP-NO Inductive Sensor 30mm Length, 10 30 V dc supply voltage , IP67 Rating

  • RS-stocknr. 103-8478
  • Fabrikantnummer 10213516
  • Fabrikant Baumer
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

Miniature Sensors

PBT sensing face
2m PUR Pre-Wired or M8 Plug-In types
For suitable M8 Plug-In leads see stock no. 290-4437 typically

Smooth Barrel

3-wire flush mounting, stainless steel bodied sensors, protected to IP67 with an operating temperature range of –25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status.

Specificaties
Kenmerk Waarde
Body Style Barrel
Output Type PNP-NO
Detection Range 2 mm
Terminal Type Cable
Supply Voltage 10 30 V dc
Length 30mm
Width 6.5mm
Maximum DC Voltage 30V
Mounting Type Flush Mount
IP Rating IP67
Switching Current 12 mA
Housing Material Stainless Steel
Maximum Operating Temperature +100°C
Short Circuit Overload Protection Yes
Standards Met CE, CULus Listed, EAC
Reverse Polarity Protection Yes
Maximum Switching Frequency 5kHz
Minimum Operating Temperature -25°C
Shielding Shielded
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
82,70
(excl. BTW)
100,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
82,70 €
Related Products
A range of Pepperl + Fuchs inductive sensors ...
Description:
A range of Pepperl + Fuchs inductive sensors available in different sensing and temperature ranges to suit a variety of industrial applications. Nickel plated brass housing with PBT face LED indication Embeddable, flush or non-flush installation available IP67 Supply voltage ...
Sick IQC series inductive proximity sensors offer up ...
Description:
Sick IQC series inductive proximity sensors offer up to four individual switching points or windows including the hysteresis can be set. Equipped with two freely programmable switching end stages, the IMC sensors can replace several conventional devices. Adjustable switch-on and ...
Inductive sensors are nowadays indispensable for industrial usage. ...
Description:
Inductive sensors are nowadays indispensable for industrial usage. As compared to mechanical switches they offer almost ideal conditions: non-contact operation free from any wear and tear, high switching frequencies and accuracy. In addition, they are insensitive to vibration, dust and ...
PBT housed control sensors that mount directly onto ...
Description:
PBT housed control sensors that mount directly onto standard actuators to monitor valve position.The sensing face is PBT and houses dual inductive sensors. The rated sensing distance is 3mm, and all the sensors are fitted with LED indicators. All units ...