Screw In Panel Mount Indicator Bulb Holder,

  • RS-stocknr. 561-713
  • Fabrikantnummer TMU/120/4
  • Fabrikant Tranilamp
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Transformer Indicator Body

Transformer lampholders designed to provide an output for a 6 V MES/MBC filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are designed to be used in conjunction with the 19mm, 19.1mm and 27mm mounting panel lens/bezels.

Lampholders incorporating transfomers allowing direct connection to the stated supply and providing low voltage output
Housing constructed from UL94V-0 rated grey polycarbonate
For insulation purposes, eg. heat shrinkable tape see stock no. 170-5403

Specificaties
Kenmerk Waarde
Lampholder Type Panel Mount
Lamp Base Screw In
Termination Type Cable Clamp
Diameter 35mm
Length 62 mm
Mounting Type Panel Mount
Series TMU
37 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,69
(excl. BTW)
15,35
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
12,69 €
10 - 24
11,61 €
25 - 49
10,54 €
50 - 99
9,46 €
100 +
8,37 €
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
The nickel plated brass body is supplied with ...
Description:
The nickel plated brass body is supplied with an insulation washer, solder tag, fixing nut and washer. Electrical connections are made via the solder tag and body return.,The caps incorporate a nickel plated brass screw with polycarbonate fresnel lens. The ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...
Panel mounting LED holders for two lead 3mm ...
Description:
Panel mounting LED holders for two lead 3mm and 5mm LEDs. These brass LED holders have a chrome, black or white anodised finish. LEDs are held in place by a push-fit nylon base for 3mm types or a screw-in nylon ...