RS PRO E10 Indicator Light, Clear, 1.25 V, 250 mA, 10h
- RS-stocknr.:
- 104-856
- Fabrikant:
- RS PRO
130 op voorraad - levertijd is 1 werkdag(en).
Geschatte totale prijs (10 Aantal stuks)
€ 9,37
(excl. BTW)
€ 11,34
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 10 + | € 0,937 | € 9,37 |
| *prijsindicatie | ||
- RS-stocknr.:
- 104-856
- Fabrikant:
- RS PRO
- Land van herkomst:
- KR
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Kenmerk | Waarde |
|---|---|
| Voltage Rating | 1.25 V |
| Lamp Base | E10 |
| Current Rating | 250 mA |
| Diameter | 11.5мм |
| Lamp Size | G3 1/2 |
| Length | 25 mm |
| Lens Colour | Clear |
| Luminosity | 1 lm |
| Life Hours | 10h |
- RS-stocknr.:
- 104-856
- Fabrikant:
- RS PRO
- Land van herkomst:
- KR
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Kenmerk | Waarde |
|---|---|
| Voltage Rating | 1.25 V |
| Lamp Base | E10 |
| Current Rating | 250 mA |
| Diameter | 11.5мм |
| Lamp Size | G3 1/2 |
| Length | 25 mm |
| Lens Colour | Clear |
| Luminosity | 1 lm |
| Life Hours | 10h |