Microchip Technology MCP23017T-E/SS, 16-Channel I/O Expander 10MHz, I2C, 28-Pin SSOP

  • RS-stocknr. 177-3316
  • Fabrikantnummer MCP23017T-E/SS
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits (IODIRA/B). The data for each input or output is kept in the corresponding input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master. The 16-bit I/O port functionally consists of two 8-bit ports (PORTA and PORTB).

16-bit input/output port expander with interrupt output
Cascadable for up to 8 devices on one bus
25mA sink/source capability per I/O
Supports 100kHz, 400kHz and 1.7MHz I2C™Compatible compatible modes

Specificaties
Kenmerk Waarde
Number of I/O Channels 16
Interface I2C
Number of Pins 28
Package Type SSOP
Clock Frequency 10MHz
Mounting Type Surface Mount
Maximum Supply Voltage 5.5 V
Minimum Supply Voltage 1.8 V
4130 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
1,141
(excl. BTW)
1,381
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
1,141 €
11,41 €
30 +
1,112 €
11,12 €
*prijsindicatie
Verpakkingsopties
Related Products
The Microchip MTCH652 is a Driver IC designed ...
Description:
The Microchip MTCH652 is a Driver IC designed to drive High-Voltage Outputs in Capacitive Touch applications. The MTCH652 combines a Boost Converter with 19 Level Shifters to drive up to 19 channels.The device is programmable via a Configuration (CONFIG) registers. ...
The MCP23017/MCP23S17 (MCP23X17) device family provides 16-bit, general ...
Description:
The MCP23017/MCP23S17 (MCP23X17) device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface.MCP23017 – I2C interface MCP23S17 – SPI interfaceThe MCP23X17 consists of multiple 8-bit configuration ...
The MCP23X08 device provides 8-bit, general purpose, parallel ...
Description:
The MCP23X08 device provides 8-bit, general purpose, parallel I/O expansion for I2C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface: MCP23008 – I2C interface, three address pinsMCP23S08 – SPI ...
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage ...
Description:
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage Tolerant I/OsSupports Hot Insertion16 I/O Pins that Default to Inputs on Power-UpOpen-Drain Interrupt Output (Active-Low INT)Bus Timeout for Lock-Up-Free OperationNoise Filter on SCL/SDA Inputs64 User-Selectable Slave ID AddressesLow Standby ...